TM300 Digital HD colorful screen battery tester

$69.99

  • BATTERY ANALYZER】 BT705 automobile battery tester designed for 12 V or 24 V batteries with a capacity of 100 to 2000 CCA, such as regular flooded, AGM flat plate, AGM spiral, GEL and deep cycle batteries, 12V & 24V starting and charging system. The test results based on CCA, EN, CA, MCA, DIN, SAE, JIS and IEC Standards.
  • 【CAR BATTERIES DOCTOR】 Adopt the advanced conductance testing technology, the premium quality copper clip and wire maintain a stable communication all throughout the testing process to provide you with reliable results! Accurately and quickly measure the actual cold cranking amps, capability of the vehicle starting battery and healthy state of the battery itself.
  • 【CRANKING AND CHARGING SYSTEM TEST】 BT705 auto tester displays the decision on the starter system, cranking voltage, and cranking time in milliseconds. Also, the battery diagnostic tool can check 12V or 24V charging system to make sure the output voltage of the generator is in a regular condition, the rectifier diode works fine and the charging current is a normal status.
  • 【FULL 10 MODES OBD2 CAR DIAGNOSTIC SCANNER】Read and erase fault codes, retrieve I/M readiness and freeze frame data, show live data in the text and graph format, auto VIN acquisition and EVAP Test (Mode 8), advanced On-board Monitoring (Mode 6).
  • 【ON-BOARD MONITOR TEST】You can use the car scanner to diagnose the misfire and the live O2 monitoring to get an idea a misfire is coming from which bank and cylinder. This code reader car diagnostic tool will graph all the real-time streaming data it reads, including but not limited to Engine Coolant Temperature, Short Term Fuel Trim, Long Term Fuel Trim, Engine RPM .
Category:

Description

1. The supported data stream depends on the OBDII system installed by the manufacturer. 2. It is a engine code reader, it DOESN’T support other systems such as ABS, transmission and others. 3. About the erase code function is performed with key on engine off. Do not start the engine. And if it still doesn’t clear the error code, maybe it is the hardware fault, it need to be fixed first and then clear codes. 4. If you are not sure whether the car model is supported, we would recommended to contact us before purchasing.

 

Additional information

Weight 200 g
Dimensions 40 × 40 × 40 cm

Reviews

There are no reviews yet.

Be the first to review “TM300 Digital HD colorful screen battery tester”

Your email address will not be published. Required fields are marked *